Project Info

SiLazur Mineral Stain, For Brick Walls With Mismatched Brick

There are some bricks in wall that are mismatched in color. Is there a way to have them match without removing them?

While this question comes up from time to time, most often people don’t know that they can easily remedy such a problem and don’t bother to ask. By using silicate stains many colors and variations can be achieved to change the color of masonry permanently.

These stains are applied with a simple foam brush when the bricks are clean and free of moisture. They can only be applied in weather conditions above 40 degrees (F). Prior to a repointing, bricks can be very easily stained and then repointed to achieve a uniform appearance. Since silicate stains are acid resistant, gentle masonry detergents can be used to clean smeared brickwork after repointing. Make sure that the silicate staining work is fully cured before any light cleaning, so that there is no damage to the stained finish.

SiLazur can be used on interior and exterior masonry wall surfaces, such as, concrete, brick, block, stucco, plaster, natural stone and drywall. SiLazur comes as an opaque, nearly solid stain.

Order by calling LimeWorks.us
Pennsylvania
215-536-6706, located in Bucks
Click images below to make larger.
Before Staining Brick with SiLazur Brick Stain
After Staining Brick with SiLazur Brick Stain

Restoration Trades DirectoryRestoration Trades Directory

Meetinghouse Enterprises      189 Bridge St      Northampton, MA 01060      Email: results@restorationtrades.com

Copyright © Custom Building and Restoration Trades Directory

Sponsored by The Guild of Building Artisans

Register to add your company to this listing.